Monitor and regulate solar input for 12V batteries with 20 Amp Charge Controller. The charge controller is designed to integrate seamlessly with Goal Zero solar panels, and has a pre-installed High Power Port and an easy-to-read LED screen. Equipped with…
Lestu meira
Vörulýsing
Monitor and regulate solar input for 12V batteries with 20 Amp Charge Controller. The charge controller is designed to integrate seamlessly with Goal Zero solar panels, and has a pre-installed High Power Port and an easy-to-read LED screen. Equipped with an IP65 rating, the charge controller is weatherproof and dustproof, providing protection against the elements when you go on outdoor or outdoor adventures.
CHARGING AND POWER
• Designed to monitor and regulate solar input for 12V batteries. For solar charging with 100 watts and lower, we recommend 10 Amp Charge Controller. For solar charging with more than 100 watts, we recommend 20 Amp Charge Controller.
• Charge Controller comes with an integrated High Power Port for connection to Goal Zero Boulder 200 solar panels. To connect and charge a 12V battery, you will need to purchase the Spade to SAE cable and several cable adapters. We recommend either SAE for Ring Terminal or SAE for Alligator Clip
• Does not work with Yeti X battery banks
TECHNICAL SPECIFICATIONS
PORTS
• Input / output terminal: M5 terminals • Solar Input Port (High Power Port): 14-23V, up to 20A • Fuse: 25A replaceable
BATTERY DETAILS
• Charging controls: PWM • Nominal solar panel amplifiers GZ-10: 20A • Normal input solar cell matrix voltage: 15-22V • Maximum voltage for solar cells (output has no load): 25V • Lowest operating voltage on the solar or battery side: 8V Minimum • Charging properties: • Start voltage at 25 ° C: 3-10V • Charging voltage at 25 ° C: • LTO battery: 14.0V • Gel battery: 14.1V • LiFePO4 battery : 14.4V • Charging voltage at 25 ° C: AGM battery-14.4V • WET battery: 14.7V • Calcium battery: 14.9V • Rechargeable voltage at 25 ° C: WET or calcium battery-15.5V • Yield voltage at 25 ° C: • Gel, AGM, WET, calcium batteries-13.6V • LTO and LiFePO4 batteries -13.4V • Compensation coefficient for battery temperature: -24mV / ° C
GENERAL
• Product -SKU: 96110
• Weight: 499 g
• Dimensions: 15.5 x 9.91 x 2.6 cm
• IP class: IP65 • Spade for HPP cable length: 91 cm • Operating temperature: -25 to 50 ° C • Certificates: IC, FCC, CE-EMC, CE-LVD
COMPATIBILITY
Compatible with Nomad 200 and Boulder 200 case. The charge controller can be installed directly on a Boulder 200 case with the available Boulder Charge Controller mounting bracket.